Climate Computers and Controllers

Farmer climate controllers are functional devices that work with modern sensors. Designed for full control of processes where care for the microclimate is essential. Intuitive arrangement of elements on the screen ensures great comfort of use, both in terms of entering the expected values ​​and reading the collected data.


CLIMATE&SHADE CONTROL


Climate & Shade Control gives you the ability to control systems such as:

Vents: The opening and closing process is divided into 10 steps. The sensor automatically closes the vent after detecting a strong wind. Weak wind and humidity limit the opening of the vent to 30%. In the case of humidity, activation takes place only when the vents are closed and the humidity exceeds the set threshold parameters. When the outside temperature drops below a certain value, the vents are unconditionally closed to protect the crops. The day and night temperature can be specified - in both cases the controller gives the possibility to program the values.

Shading system: The system works in two modes for the perfect adjustment of parameters. Time mode - closing at X hour, opening at Y hour; Light Sensor Mode - 10 steps of opening the curtain in 4 positions 0%, 40%, 70%, 100% and switching on the Ventilation Slot.

Equipment: Airing: Shading system: Additional options:

Control panel,

Sensors:

  • sun,
  • wind,
  • humidity,
  • outside and inside temperature.
  • 10 steps opening and closing,
  • Recognition of the time of day and night from the sensor,
  • Airing for humidity - 30%,
  • Minimum outside temperature blocking ventilation,
  • Weak (up to 30%) and strong wind restricting opening.
  • 3 levels of shading,,
  • Ventilation gap - 1 step - virtual switch for its possible deactivation,
  • Night curtain dimming.
 
  • Rain sensor,
  • Heater / pump control output,
  • Blower control output,
  • Irrigation options,
  • Connecting to the network,
  • Wired access to readings from the building next to the facility.

 CLIMATE CONTROL (1 SECTION)


Climate Control gives you the ability to control a system such as vents.

The opening and closing process is divided into 10 steps. The sensor automatically closes the vent after detecting a strong wind. Weak wind and humidity limit the opening of the vent to 30%. In the case of humidity, activation takes place only when the vents are closed and the humidity exceeds the set threshold parameters. When the outside temperature drops below a certain value, the vents are unconditionally closed to protect the crops. The day and night temperature can be specified - in both cases the controller gives the possibility to program the values.

 

Equipment: Airing and Heating: Additional options:

Control panel,

Sensors:

  • wind,
  • humidity,
  • outside and inside temperature.
  • 10 steps opening and closing,
  • Recognition of the time of day and night from the clock,
  • Airing based on humidity,
  • Minimum outside temperature blocking ventilation,
  • Weak and strong wind restricts opening,
  • Heating activation temperature,
  • Humidity
  • Switching on the blowers.
  • Rain sensor,
  • Irrigation options,
  • Connecting to the network,
  • Wired access to readings from the building next to the facility.

CLIMATE 2 CONTROL (2 SECTIONS)


The main task of the Climate 2 Control controller is to maintain the set temperature inside. This is done by opening or closing the vent. The opening and closing process is divided into 10 steps. The exception is the appearance of the STRONG WIND parameter, which results in the immediate and unconditional closure of the vent. The MENU also displays the LOW WIND parameter, which, like HUMIDITY, limits the opening of the vent to 30%. In the case of humidity, however, it is a function that is taken into account only when the vents are closed for a certain set time, and the humidity in the tunnel is higher than the one we have set. An additional option is also the measurement of the EXTERNAL TEMPERATURE, which, in the event of a too low value, protects the crops by completely and conditionally closing the vent. You can also specify 2 ranges of temperatures - NIGHT AND DAY, recognized from the clock settings with different setting values. Measurements and control for 2 independent sections.

Equipment: Airing: Additional options:

Control panel,

Sensors:

  • wind,
  • 2x humidity,
  • 2x outside and 1x inside temperature
  • 10 steps opening and closing,
  • Recognition of the time of day and night from the sensor,
  • Airing due to humidity,
  • Minimum outside temperature blocking ventilation,
  • Weak and strong wind restricts opening,
  • Temperature and humidity measurement for 2 independent sections.
  • Rain sensor,
  • Heater / pump control output,
  • Blower control output,
  • Irrigation options,
  • Connecting to the network,
  • Wired access to readings from the building next to the facility.

CLIMATE CONTROL MINI


CLIMATE CONTROL MINI is a controller designed for the simplest crops. It only has a wind and temperature sensor. It is distinguished by DAY AND NIGHT TEMPERATURE. It also recognizes STRONG AND WEAK WIND.

The ability to precisely control the ventilation system is the first step to achieving optimal growing conditions. OPTIMAL CONDITIONS = FASTER GROWTH. The opening and closing process is divided into 10 steps. The sensor automatically closes the vent after detecting a strong wind. Light wind limits the opening of the vent to 30%. The day and night temperature can be specified - in both cases the controller gives the possibility to program the values.

Equipment: Airing:

Control panel,

Sensors:

  • wind,
  • inside temperature.
  • 10 steps of airing, 
  • measuring only weak and strong wind and internal temperature.

SHADE CONTROL


The shading controller adjusts the curtains in 10 steps in 4 shade positions - 0%, 40%, 70%, 100%, depending on the light intensity. It has the option of activating a VENTILATION SLOT, which does not have to be used. An important advantage is also NIGHT SHADING, which unconditionally slides the curtains in order to keep the temperature under the shading curtain. You can also use the dedicated outputs for lighting crops.

Equipment: Shading: Additional options:

Control panel,

Sun sensor,

  • 3 degrees of shading,
  • Night shading,
  • Slit - 1 step,
  • Lighting the crops.
  • Matched lighting,
  • Connecting to the network,
  • Wired access to readings from the building next to the facility.

CLIMATE CONTROL +


The difference between an ordinary climate controller is the 2 times of opening and closing the vents, which makes it possible to operate the side and roof vents in their full range of movement. Naturally, there is 1 measurement left, but we do not have the option of a heater and blower in the standard version (due to the use of basic outputs for the side vent).


Need help choosing? - Contact the sales department - here!

News

/ More news
t100g-with-two-different-foils

Blog

/ More entries
fogging-systems-in-a-foil-tunnel
do_gory